FreeFlow Process Manager Operator and Administrator Guide
2-159
Workflow Builder
To configure the hot folder system settings
1. In Workflow Builder, select [Options: Hot Folders].
2. Select [Settings...].
3. Set the desired interval, from 10 to 100. Available if Enable
clustering and Enable hot folder scheduling are not
selected.
4. If required, select Enable file clustering to wait for a minimum
number of files before processing.
5. If required, select Enable hot folder scheduling to enable the
scheduling function.
6. Select Set scheduled times for each hot folder individually
to specify times that you want hot folders scanned on a per hot
folder basis.
7. Select Use the following scheduled times for all hot
folders to specify times for all hot folders, and then schedule
or remove the desired scheduling times:
• Click to set the time of day and select [Add], or
• Select a time of day from the Scheduled times list and
select [Remove].
8. Close the Hot Folder System Settings dialog and the Hot
Folders dialog.
To Next Page
Loading...
Need help?
General
