A
DVANCED
P
RINTING
4.14
4
In the Overlays window, click Create Overlay.
5
In the Create Overlay window, type a name of up to eight
characters in the File name box. Select the destination
path, if necessary. (The default is C:\Formover.)
6
Click Save. The name appears on the Overlay List box.
7
Click OK or Yes to finish creating.
The file is not printed out. Instead it is stored on your
computer hard disk drive.
NOTE
: The overlay document size must be the same as the
documents you print with the overlay. Do not create an overlay
with a watermark.
To Next Page
Loading...
