Xerox Phaser 6100 User Guide

M AINTAINING Y OUR P RINTER
6.8
Replacing the Toner Cartridges
The printer uses four colors and has a different toner cartridge
for each one: cyan (C), magenta (M), yellow (Y), and black (K).
Replace a toner cartridge when the printer control panel displays
‘Replace [Color] Toner’. The control panel display tells you which
color needs to be replaced.
1 Turn the printer off, then wait a few minutes for the printer
to cool.
2 Using the handle, completely open the left cover A until it is
at right angles to the main frame and the toner cartridges
are ejected.
3 Pull the handle lightly first, and then holding the used toner
cartridge, remove it.
CAUTION : If you open the left cover A for a few minutes, the
imaging unit can be exposed to light. This causes damage to the
imaging unit. Close the top and left cover A should the setup need
to be halted for any reason.

Xerox Phaser 6100 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	1200 x 600 DPI
Time to first page (black, normal)	15 s
Time to first page (color, normal)	24 s
Print speed (black, normal quality, A4/US Letter)	21 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	64 MB
Standard input trays	2
Compatible operating systems	MAC OS, NT4, OS X, Win2000, Win95/98, WinME, WinXP, Win 98se
Recommended operating temperature range (T-T)	15 - 32.5 °C
Media types supported	A-4
Page description languages	GDI
Total input capacity	350 sheets

Weight and Dimensions

Dimensions (WxDxH)	510 x 470 x 405 mm