J
Jason AllenJul 27, 2025
What to do if Xerox VersaLink B405DN All in One Printer does not power on?
- EewagnerJul 27, 2025
If your Xerox All in One Printer doesn't power on, first, ensure the power switch is turned on by pressing the Power/Wake button on the control panel. Then, check that the power cord is securely plugged into the outlet. If it still fails to power on, try performing a full reset: power off the printer, unplug the power cord, wait 30 seconds, plug it back in securely, and then press the Power/Wake button. Also, verify the outlet is working by plugging in another appliance or trying a different outlet. Finally, ensure the power source matches the printer's electrical specifications as detailed on page 222.