• 2-Sided Printing allows you to select 2-sided printing options. Click the Down arrow to select an
option:
- 1-Sided Print prints the exception pages on one side only.
- 2-Sided Print prints the exception pages on both sides of the paper and flips the pages on the
long edge. The job then can be bound on the long edge of the pages.
- 2-Sided Print, Flip on Short Edge prints the exception pages on both sides of the paper and
flips the pages on the short edge. The job then can be bound on the short edge of the pages.
- Use Job Setting prints the job using the attributes shown in the Job Settings box.
• Job Setting: Displays the attributes of the paper for the remainder of the job.
Note
Some combinations of 2-sided printing with certain paper types and sizes can produce unexpected
results.
Printing Watermarks for Windows
A watermark is special-purpose text that can be printed across one or more pages. For example, you can
add a word like Copy, Draft, or Confidential as a watermark instead of stamping it on a document before
distribution.
Note
• This feature is available only on a Windows computer printing to a network printer.
• Not all options listed are supported on all printers. Some options apply only to a specific printer model,
configuration, operating system, or print driver type.
• Watermarks are not supported for some print drivers when booklet is selected or when more than
one page is printed on a sheet of paper.
To print a watermark:
1. In the print driver, click the Document Options tab.
2. Click the Watermark tab.
3. From the Watermark menu, select the watermark. You can choose from preset watermarks, or create
a customized watermark. You can also manage watermarks from this menu.
4. Under Text, select an option:
• Text: Enter the text in the field, then specify the font.
• Time Stamp: Specify the date and time options, then specify the font.
• Picture: To locate the picture, click the Browse icon.
5. Specify the scaling angle and position of the watermark.
• Select the scaling option that specifies the size of the picture in relation to the original image.
Use the arrows to scale the image in increments of 1%.
• To define the angle of the image on the page, specify the position option or to rotate the image
left or right by increments of 1, use the arrows.
• To define the location of the image on the page, specify the position option, or to move the image
in each direction in increments of 1, use the arrows.
6. Under Layering, select how to print the watermark.
Xerox
®
VersaLink
®
B605/B615 Multifunction Printer5-14
User Guide
Printing
To Next Page
Loading...
Need help?
General
Weight and Dimensions
