EasyManua.ls Logo

Xerox VersaLink B615 - Power Options

Xerox VersaLink B615
220 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DescriptionNameItem
This button serves several power-related functions.Power/Wake3
When the printer is off, this button powers on the printer.
When the printer is on, pressing this button displays a menu on the control
panel. From this menu, you can choose to enter Sleep mode, restart, or
power off the printer.
When the printer is on, but in a low-power or Sleep mode, pressing this
button wakes the printer.
When the printer is powered on, holding this button for 5 seconds powers
off the printer.
This button also blinks to indicate the power status of the printer.
When the light blinks slowly, the printer is in Low Power or Sleep mode.
When the light blinks fast, the printer is powering down, or exiting a low-
power mode.
This button provides access to the Home menu for access to printer features.Home Button4
Near Field Communication (NFC) is a technology that enables devices to
communicate when they are within 10 cm (4 in.) of each other. Use the NFC
area to obtain a network interface or to establish a TCP/IP connection
between your device and the printer.
NFC Area5
This light blinks blue or amber to indicate printer status.Status LED6
Blue
- Blinks once slowy to acknowledge a successful Authentication request.
- Blinks once slowly for a Copy or Print job initiated at the control
panel.
- Blinks twice slowly for Fax or Print job received from the network.
- Blinks fast while the printer is powering up, or to signal detection of
a Wi-Fi Direct connection request.
Amber
- Blinks to indicate an error condition or warning that requires your
attention. For example, an out-of-toner condition, a paper jam, or
out of paper for the current job.
- The printer status LED also blinks to indicate a system error, which
typically is associated with an error code.
Power Options
The Power/Wake button is a single multifunction button on the control panel.
When used in conjunction with the main power switch, the Power/Wake button powers on the printer.
If the printer is already powered on, you can use the Power/Wake button to:
2-5Xerox
®
VersaLink
®
B605/B615 Multifunction Printer
User Guide
Getting Started

Table of Contents

Related product manuals