Routine Maintenance Items
Routine maintenance items are printer parts that have a limited life and require periodic replacement.
Replacements can be parts or kits. Routine maintenance items are typically customer-replaceable parts.
Note
Each routine maintenance item includes installation instructions.
Routine maintenance items for this printer include the following:
• Drum Cartridge Kit
• Transfer Roller
• Feed Roller
• Fuser
Ordering Supplies
When to Order Supplies
A warning appears on the control panel when supplies near their replacement time. Verify that you have
replacements on hand. It is important to order these items when the messages first appear to avoid
interruptions to your printing. An error message appears on the control panel when supplies must be
replaced.
Order supplies from your local reseller or go to www.xerox.com/office/VLB605_VLB615supplies.
Caution
Use of non-Xerox supplies is not recommended. The Xerox Warranty, Service Agreement, and Total
Satisfaction Guarantee do not cover damage, malfunction, or degradation of performance caused by
use of non-Xerox supplies, or the use of Xerox supplies not specified for this printer. The Total Satisfaction
Guarantee is availablein the United States and Canada. Coverage could vary outside these areas. Please
contact your Xerox representative for details.
Supply Status Information
You can check the supplies status, customize the alerts that appear on the control panel, and configure
email alert notifications. For more information, refer to the Supply Status.
Supplies Usage Report
The Supplies Usage Report provides coverage information and part numbers for reordering supplies.
The date a supply item was installed also appears on the report.
To print the Supplies Usage Report:
1. At the printer control panel, press the Home button.
2. Touch Device > About > Information Pages.
3. Touch Supplies Usage Report.
4. To return to the Home screen, press the Home button.
7-15Xerox
®
VersaLink
®
B605/B615 Multifunction Printer
User Guide
Maintenance
To Next Page
Loading...
