9. Lift and carry the printer as shown in the illustration.
Note
• When moving the printer, do not tilt it more than 10 degrees in any direction. Tilting the printer
more than 10 degrees can cause toner spillage.
• Repack the printer and its options using the original packing material and boxes or a Xerox
Repackaging Kit.
• Failure to repackage the printer properly for shipment can result in damage not covered by the
Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee. The Xerox
®
Warranty,
Service Agreement, or Total Satisfaction Guarantee do not cover damage to the printer caused
by improper moving.
After moving the printer:
1. Reinstall any parts that you removed.
2. Reconnect the printer to the cables and power cord.
3. Plug in and power on the printer.
Xerox
®
VersaLink
®
B605/B615 Multifunction Printer7-20
User Guide
Maintenance
To Next Page
Loading...
