How to fix Xerox WorkCentre 3025BI Copier when it does not print PDF file correctly?
If the machine does not print PDF file correctly with your Xerox Copier, printing the PDF file as an image may enable the file to print. Turn on Print As Image from the Acrobat printing options.
Why does Xerox Copier print text wrong, garbled, or incomplete?
If the machine prints, but the text is wrong, garbled, or incomplete on your Xerox Copier: * Disconnect the machine cable and reconnect. * Check the application’s printer selection menu to ensure that your machine is selected. * Try printing a job from another application. * Exit Windows and reboot the computer. Turn the machine off and back on again.
Why does paper stick together in Xerox WorkCentre 3025BI?
If the paper sticks together in your Xerox Copier: * Check the maximum paper capacity of the tray. * Make sure that you are using the correct type of paper. * Remove paper from the tray and flex or fan the paper. * Load paper of only one type, size, and weight.
Why is print job extremely slow on Xerox WorkCentre 3025BI?
If the job is very complex on your Xerox Copier, reduce the complexity of the page or try adjusting the print quality settings.
Why does my Xerox WorkCentre 3025BI Copier have a network problem due to IP conflict?
If the network IP address you have set is being used by someone else, check the IP address and reset it if necessary.
How to print special-sized paper on Xerox Copier?
If the machine does not print special-sized paper, such as billing paper, with your Xerox Copier, set the correct paper size in the Custom Paper Size Settings in the Paper tab in the Printing Preferences.
How to adjust darkness of copies on Xerox WorkCentre 3025BI Copier?
If copies are too light or too dark on your Xerox Copier, use the Darkness in Copy feature to lighten or darken the copies.
What to do if Xerox WorkCentre 3025BI Copier says toner is low, order print cart?
If only a small amount of toner is left in the print cartridge of your Xerox Copier, prepare a new cartridge for replacement. You may temporarily increase the printing quality by redistributing the toner.
What to do if my Xerox WorkCentre 3025BI shows an invalid print cartridge error?
If the print cartridge you have installed is not designed for your Xerox Copier, install a new print cartridge designed for your machine.
Why doesn't the scanner work on Xerox Copier?
If the scanner does not work with your Xerox Copier: * Make sure that you place the original to be scanned face down on the platen glass, or face up in the automatic document feeder. * Check that the machine cable is connected properly. * Switch the cable with a known good cable. If necessary, replace the cable. * Check that the scanner is configured correctly. Check scan setting in the application you want to use to make certain that the scanner job is being sent to the correct port.
General| Print Technology | Laser |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Speed | Up to 20 ppm |
| Copy Speed | Up to 20 cpm |
| Copy Resolution | Up to 600 x 600 dpi |
| Fax Transmission Speed | 33.6 Kbps |
| Memory | 128 MB |
| Duplex Printing | Manual |
| First Page Out | As fast as 8.5 seconds |
| Paper Input Capacity | 150 sheets |
| Paper Output Capacity | 100 sheets |
| Paper Capacity | 150 sheets |
| Processor Speed | 600 MHz |
| Dimensions | 406 x 360 x 257 mm |
| Weight | 7.5 kg |
| Scan Resolution | 600 x 600 dpi |
| Maximum Document Size | 216 x 356 mm |
| Connectivity | USB, Wi-Fi |
| Print Resolution | Up to 1200 x 1200 dpi enhanced image quality |
| Duty Cycle | Up to 15, 000 pages |
Provides a visual guide to the machine's components and layout.
Explains the functions of the printer's control panel buttons and display.
Step-by-step instructions for connecting and turning on the printer.
Lists the required printer and scanner software for different operating systems.
Details how to log in to the printer for administration and feature access.
Guides through initial setup steps like language, date, and basic configurations.
Explains how to use the web interface for printer configuration and administration.
Covers configuring network settings for static and dynamic IPv4/IPv6 addressing.
Instructions for installing drivers for Windows, Macintosh, and Linux systems.
Details the process for installing printer drivers on Windows for local or network use.
Configures scanning to a network or local PC using Easy Printer Manager.
Instructions on enabling and configuring the fax functionality on the machine.
Comprehensive guide to printing documents from Windows applications.
Basic steps for making copies, including loading documents and starting jobs.
Instructions for scanning documents from Windows PCs using EPM.
Step-by-step guide for sending faxes from the machine or computer.
Instructions for sending faxes directly from a PC using the PC-Fax software.
Configuring administrator accounts, passwords, and access controls for security.
Controlling access to Internet Services by filtering IP addresses and ports.
Information on ordering and checking the status of printer supplies like cartridges.
General guidance on identifying and resolving machine problems using error messages.
Procedures for clearing paper jams from different parts of the machine.
Lists common error messages and their suggested solutions for troubleshooting.
Guidelines and warnings related to electrical hazards and safe power cord usage.
Safety precautions during printer operation, including handling paper and supplies.
Safety instructions and symbols related to printer maintenance procedures.
To Next Page
