Print WorkCentre
®
5945/5955
510 User Guide
4. Select the Print from USB button.
5. Select the saved job required.
6. Select any options required.
7. Select the Paper Supply button.
8. Select the Paper Supply option required.
• Automatically Select lets the device select the appropriate paper size for each original
based on the size of the original and reduce or enlarge programming.
• Select a paper tray that contains the size and type of paper you require. The size and media
loaded in each tray is displayed.
9. Select the OK button.
10. Select the 2-Sided Printing button.
11. Select the 2-Sided Scanning option required.
• 1-Sided use this option if your originals are printed on 1 side.
• 2-Sided use this option if your originals are 2-sided. The document feeder must be used to
scan your originals with this option.
• 2-Sided, Rotate Side 2 use this option if your originals are 2-sided and open up like a
calendar. The document feeder must be used to scan your originals with this option.
12. Select the Finishing button to select a specific finishing option for the output, or select Auto
for the device to choose an appropriate option.
13. Press the Start button on the Control Panel to print the job.
14. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
15. Remove the USB Flash Drive from the USB port when you have finished.
More Information
Using a User ID to Log In at the Device
Scanning to a USB Memory Stick using the Scan To Feature
Using Internet Services to find System Administrator Contact Details
System Administrator Guide www.xerox.com/support.
To Next Page
Loading...
Need help?
General
