6. XPILOT Driving
126
Turning On/O with CIDTurning On/O with CID
─
After the vehicle is Ready, the RCW switch status defaults
to the last operation status. Tap "Vehicle Control
→
XPILOT
→
Rear Collision Warning" to turn on/o RCW.
─
If the RCW function is malfunctioning and the RCW switch
is o, a notification of "Malfunctioning, cannot be turned
on" once you tap on the "Rear Collision Warning" switch.
Please contact your local authorized service center.
Rear Cross Trac Alert (RCTA) warnings and restrictions also
apply to RCW. Please refer to RCTA warnings and restrictions.
Refer to Page 124.
To Next Page
Loading...
