XPENG P7 User Manual

2. Preparations Before Driving (Exterior)
20
Ready to StartReady to Start
1. The driver is sitting in the driver's seat (without physical
key nearby).
2. Hit the brakes.
3. Put the NFC key close to the wireless charging induction
area.
4. Shift into D/R gear and the vehicle enters the Ready state.
Note
●
After unlocking the vehicle with the NFC key, by
default, you can enter the Ready state by shifting
into the D/R gear within 20 min, and after 20 min you
need to re-execute steps 1, 2, 3 and 4 above to enter
the Ready state.
●
The normal operating temperature range of the NFC
key is -20 – 50
°C
, please note that under extremely
low or high temperature, this function will be aected
or even cannot be used normally. In case of such
situation, please contact your local authorized service
center as soon as possible.

XPENG P7 Specifications

General

Brand	XPENG
Model	P7
Category	Automobile
Language	English