XPENG P7 User Manual

2. Preparations Before Driving (Exterior)
26
Anti-Pinch ProtectionAnti-Pinch Protection
The X-wing door has an anti-pinch protection function during
the opening or closing process, that is, when resistance is felt
or a foreign object is clamped on the door during the electric
opening/closing of the door, it will automatically stop moving
and retreat for a certain distance to prevent pinching.
Initialization of Anti-Pinch FunctionInitialization of Anti-Pinch Function
If the anti-pinch is triggered frequently, it could easily cause
the anti-pinch protection and the electric function to fail. It
needs to automatically restore to the electric function after
completing a manual full closing, and the anti-pinch function
will also resume.
Caution
●
In spite of the anti-pinch protection, there is still a
danger of pinching. Always pay attention to keeping
an unobstructed door opening area. Otherwise,
under special circumstances (such as thin and soft
obstacles), it will not be possible to ensure that the
moving process is interrupted.
●
Check the passengers before closing the door, pay
special attention to the elderly and children, and
make sure that there are no people or obstacles near
the door. Do not lean your hand or other parts of your
body against the door hinge or the gap between the
door gaps. Some parts of the edge of the door may
not sense resistance, therefore, will not stop moving.
If they are caught when opening or closing the door,
serious injury may result.
Warning
●
Obstacle avoidance is supported on front doors and
can detect objects in the way of door opening. In
most cases, the door will stop moving if an object
is detected. However, the sensor cannot detect all
directions, especially when the doors are closed.
Therefore, you should make sure that no object exists
in the way of the door and adopt measures to prevent
the door from hitting any object or person. Otherwise,
it may result in serious personal injury or death.
●
Do not paste or apply adhesive products (such as
tape, stickers, rubber paint, etc.) on the outside of the
front door to block or cover the sensor. Otherwise, it
will aect the detection performance of the sensor.
●
Before opening the door, make sure that the side of
the door and the top of the door keep a sufficient
distance. Otherwise, the door or window glass may
be damaged.
●
If there is snow or ice on the front door, please clear
them before opening the doors. Otherwise, snow may
enter the vehicle and turn to ice that prevents the
door from opening.
●
It takes time to open and close the doors electrically.
For example, in rainy weather, opening the X-wing
door may cause rainwater to flow from the X-wing
door into the front seat area or onto occupants.

XPENG P7 Specifications

General

Brand	XPENG
Model	P7
Category	Automobile
Language	English