Yamaha BR250F - Bulb (S); Headlight Beam Switch

®
©
LIGHTING SYSTEM
BULB (S)
1.Remove:
• Headlight
bulb
• Tail/brake light bulb
• Meter light bulb
2. Connect:
• Pocket tester
(to
bulb terminals)
A WARNING
Keep flammable products and your hands away
from the bulb while it is on; it will be hot. Do not
touch the bulb until it cools down.
® Headlight
© Meter light
3. Check:
• Bulb(s)
(fi)Tail/brake light
®
Terminal
Good condition
CD-®
0
CD-@
0
o :Continuity
HEADLIGHT BEAM SWITCH
1.Disconnect:
• Headlight beam switch coupler
2. Connect:
• Pocket tester
(to headlight beam switch coupler)
3. Check:
• Headlight beam switch
continuity
Faultv-efteplace.
Switch
®Good
(fi) Good
position
condition
condition
HI
x
0
LO
0
x
-15-
0: Continuity x: No continuity