PSR-A2000 Owner’s Manual 101
Voices – Playing the Keyboard –
1
The GM/XG Voices cannot be directly called up from the VOICE category selection buttons. However, they
can be called up via panel operation by following the procedure below.
1 Press one of the PART SELECT button to which you want to call up the desired Voice.
2 Press one of the VOICE category selection buttons to call up the Voice Selection
display.
3 Press the [8 ▲] (UP) button to call up the Voice categories.
4 Press the [2 ▲] (P2) button to display Page 2.
5 Press the desired [A]–[J] button to call up the Voice Selection display of GM/XG
Voices, GM2 Voices, etc.
6 Select the desired Voice.
Selecting GM/XG or Other Voices from the Panel
43