Starting Up
PSR-A2000 Owner’s Manual 25
The File Selection display is for selecting Voice, Styles, and other data. The File
Selection display appears when you press one of the VOICE or STYLE category
selection buttons, SONG [SELECT] button, etc.
1 Location (drive) of data
PRESET Location where pre-programmed (preset) data is stored.
USER Location where recorded or edited data is saved. Installed Expan-
sion Voices or Styles are also saved here in the Expansion folder.
USB Location where data on USB storage device (USB flash memory,
etc.) is saved.This appears only when USB storage device(s) is
connected to the [USB TO DEVICE] terminal (page 93).
2 Selectable data (files)
The files that can be selected on this display are shown. If more than 10 files
exist, the page numbers (P1, P2 ...) are shown below the files. Pressing the
corresponding button changes the display page. When other pages follow, the
“Next” button appears, and for the previous page, the “Prev.” button appears.
3 File/folder operation menu
You can save and manage your data files (copy, move, delete, etc.) from this
menu. For detailed instructions, refer to pages 27 – 29, 66.
File Selection Display Configuration
SONG
selection
button
REGIST BANK
selection button
MULTI PAD CONTROL
[SELECT] button
STYLE category
selection button
VOICE category
selection button
1
2
3
NOTE
Hereafter in this manual, any USB
storage device such as USB flash
memory, etc. will be referred to as
“USB storage device.”
NOTE
The data, both pre-programmed and
your own original, are saved as
“files.”
NOTE
You can open the File Selection dis-
play for a specified file in the con-
nected USB storage device from the
[USB] button.
[USB] → [A] SONG/[B] STYLE/[C]
REGIST/[F] VOICE/ [G] MULTI PAD.
To Next Page
Loading...
Need help?
General
