30 PSR-A2000 Owner’s Manual
Starting Up
The instructions that follow show you how to enter characters for naming your files/
folders, inputting keywords, etc. Entering characters should be done in the display
shown below.
1 Change the type of character by pressing the [1 ▲] button.
• CASE capital letters, numbers, marks
• case lowercase letters, numbers, marks
2 Use the [DATA ENTRY] dial to move the cursor to the desired
position.
3 Press the [2 ▲▼] – [6 ▲▼] and [7 ▲] buttons, corresponding to
the character you wish to enter.
To actually enter the selected character, move the cursor or press another letter-
input button. Alternately, you can wait for a short time and the characters will be
entered automatically.
For details on entering characters, refer to “Other character-entry operations”
below.
4 Press the [8 ▲] (OK) button to actually enter the new name and
return to the previous display.
Entering Characters
2
1 4
3
Several different characters are
assigned to each button, and the
characters change each time you
press the button.
When inputting lyrics in the Song
Creator function, you may also enter
Japanese characters (kana and kanji).
The file name can contain up to 41
characters and the folder name can
contain up to 50 characters.
To cancel the character-entering oper-
ation, press the [8 ▼] (CANCEL) but-
ton.
To Next Page
Loading...
Need help?
General
