PSR-A2000 Owner’s Manual 179
Connections – Using Your Instrument with Other Devices –
10
In this section, you can make MIDI-related settings for the instrument. The PSR-A2000 gives you a set of ten
pre-programmed templates that let you instantly and easily reconfigure the instrument to match your
particular MIDI application or external device. Also, you can edit the pre-programmed templates and save up
to ten of your original templates to the USER Page.
NOTE You can save all your original templates as a single file to a USB storage device: [FUNCTION] → [I] UTILITY → TAB [E][F] SYSTEM RESET → [G]
MIDI SETUP FILES. See page 190.
1 Call up the operation display.
[FUNCTION] → [H] MIDI
2 Select a pre-programmed template from the PRESET Page (page 180).
If you have already created your original template and saved it to the USER Page, you can also select the
template from the USER Page.
3 Press the [8 ▼] (EDIT) button to call up the MIDI display to edit the selected template.
4 Use the TAB [E][F] buttons to call up the relevant setting display.
• SYSTEM MIDI System Settings (page 181)
• TRANSMIT MIDI Transmission Settings (page 182)
• RECEIVE MIDI Reception Settings (page 183)
• BASS Settings for the bass note of chord for Style playback via MIDI reception data
(page 184)
• CHORD DETECT Settings for the chord type for Style playback via MIDI reception data (page 184)
5 When you’ve finished editing, press the [EXIT] button to return to the MIDI template
Selection display.
6 Select USER tab display by using the TAB [E][F] buttons, then press the [6 ▼] (SAVE)
button to save the edited template.
MIDI Settings
36
2
To Next Page
Loading...
Need help?
General
