140 PSR-A2000 Owner’s Manual
Songs – Recording Your Performances and Creating Songs –
3
Playing Backing Parts with the Performance Assistant Technology
This feature makes it exceptionally easy to play the backing parts along with Song playback.
NOTE To use the performance assistant technology, the Song must contain chord data. If the Song contains this data, the current chord name will be displayed in
the Main display during Song playback, letting you easily check whether the Song contains chord data or not.
1 Select a Song.
2 Call up the operation display.
[FUNCTION] → [B] SONG SETTING
3 Press the [8 ▲] button to turn the “P.A.T.” (performance assistant technology) on.
4 Press the SONG [>/
❙
❙
] (PLAY/PAUSE) button to start playback.
5 Play the keyboard.
The instrument automatically matches your performance on the keyboard to the Song playback and
chords, no matter what keys you play. It even changes the sound according to the way you play. Try
playing in the three different ways below.
6 Press the [■] (STOP) button to stop playback.
7 Press the [8 ▲▼] button to turn the “P.A.T.” off.
Playing the left and right
hand together (method 1).
Playing the left and right
hand together (method 2).
Playing the left hand and
right hand alternately.
Play three notes at
the same time with
your right hand.
Play several notes one after
the other with different fin-
gers of your right hand.
Play three notes at
the same time with
your right hand.
To Next Page
Loading...
Need help?
General
