168 PSR-A2000 Owner’s Manual
Mixing Console – Editing the Volume and Tonal Balance –
8
2 Press the [8 ▲] (OK) button to apply your Revoice settings.
NOTE To cancel the Revoice operation, press the [8 ▼] (CANCEL) button.
3 In the VOL/VOICE Page, press the [F] button to set the SONG AUTO REVOICE to ON.
[1 ▲▼]–
[3 ▲▼]
VOICE NAME Selects the XG Voices to be replaced (Voices usually used when playing
back).
[4 ▲▼]–
[6 ▲▼]
REVOICE TO Selects the Voices used to replace the XG Voices (when SONG AUTO
REVOICE is set to ON).
[F] ALL REVOICE Replaces all of the replaceable XG Voices with the rich and authentic
Voices of the PSR-A2000.
[I] BASIC
REVOICE
Replaces only the recommended Voices that are suitable for playing back
the song.
[J] ALL NO
REVOICE
All the Voices are returned to the original XG Voices.
Editing FILTER Parameters
[D]/[I] HARMONIC
CONTENT
Allows you to adjust the resonance effect (page 109) for each part.
[E]/[J] BRIGHTNESS Determines the brightness of the sound for each part by adjusting the cut-
off frequency (page 109).
To Next Page
Loading...
Need help?
General
