PSR-A2000 Owner’s Manual 169
Mixing Console – Editing the Volume and Tonal Balance –
8
Editing TUNE Parameters
[A]/[B]/
[F]/[G]
PORTAMENTO
TIME
Portamento is a function that creates a smooth transition in pitch from the
first note played on the keyboard to the next. The Portamento Time deter-
mines the pitch transition time. Higher values result in a longer pitch
change time. Setting this to “0” results in no effect. This parameter is
available when the selected keyboard part is set to Mono.
[C]/[H] PITCH BEND
RANGE
Determines the pitch bend range for each keyboard part which is affected
by controlling the joystick. The range is from “0” to “12” with each step
corresponding to one semitone.
[D]/[I] OCTAVE Determines the range of the pitch change in octaves, over two octaves up
or down for each keyboard part. The value set here is added to the setting
via the UPPER OCTAVE [-]/[+] buttons.
[E]/[J] TUNING Determines the pitch of each keyboard part.
[1 ▲▼]–
[3 ▲▼]
TRANSPOSE Allows you to set transposition for overall sound of the instrument
(MASTER), Song playback (SONG), or the keyboard pitch (KEY-
BOARD), respectively. Please note that the “KEYBOARD” also trans-
poses the keyboard pitch of Style playback and the Multi Pads (since
these are also affected by keyboard play in the left-hand section).
To Next Page
Loading...
Need help?
General
