Connections – Using Your Instrument with Other Devices –
10
92 PSR-A2000 Owner’s Manual
Optional footswitches (Yamaha FC4 or FC5) and an optional Foot controller
(Yamaha FC7) can be connected to one of the FOOT PEDAL jacks. A footswitch
can be used for switching functions on and off, while a foot controller controls
continuous parameter such as volume.
Default functions
By assigning the function for each foot switch/controller, you can conveniently
control sustain and volume with either pedal jack or control many other functions by
pedal.
• Example: Controlling Song Start/Stop by footswitch
Connect a footswitch (FC4 or FC5) to one of the FOOT PEDAL jacks.
To assign the function to the connected pedal, select “SONG PLAY/PAUSE” in the
operation display: [FUNCTION] → [D] CONTROLLER → TAB [E][F] FOOT
PEDAL.
Connecting a Footswitch/Foot Controller
FOOT PEDAL 1 Switches sustain on or off. Use the FC4 or FC5 footswitch.
FOOT PEDAL 2 Controls the volume (expression function). Use the FC7 foot
controller.
Make sure to connect or disconnect
the pedal only when the power is off.
Advanced Features
Refer to the Advanced Features section in this manual, Chapter 10.
Assigning specific functions to each
foot pedal:
[FUNCTION] → [D] CONTROLLER → TAB
[E][F] FOOT PEDAL
FC4
FC7
FC5
To Next Page
Loading...
Need help?
General
