Yamaha PSR-A2000 User Manual

Registration Memory – Saving and Recalling Custom Panel Setups –
6
78 PSR-A2000 Owner’s Manual
You can call up the information display to take a look which Voices and Style are
memorized to the [1] – [8] buttons of a Registration Memory Bank.
1 Simultaneously press the REGIST BANK [+] and [-] buttons to
call up the Registration Bank Selection display, then use the
[A] – [J] buttons to select the desired Bank.
2 Press the [7▲] (INFO.) button to call up the information display.
By using the TAB [E][F] buttons, you can switch between the two information
display pages: information for the Registration Memory [1] – [4] buttons and
information for the [5] – [8] buttons.
3 Press the [F] (CLOSE) button to close the information display.
Confirming the Registration Memory Information
NOTE
You can instantly call up the informa-
tion display of the currently selected
Registration Memory Bank by press-
ing the [DIRECT ACCESS] button and
one of the REGISTRATION MEMORY
[1] – [8] buttons in sequence.
3
2
The REGISTRATION EDIT
display appears. See below.
NOTE
If some Voice part is set to off, the
corresponding Voice part name is
shown in gray.
REGISTRATION EDIT display
The contents of the current Registration Bank are listed in the REGISTRA-
TION EDIT display. The names of the Panel Setups memorized to the [1]–
[8] buttons of the Registration Memory Bank are shown in the display. You
can rename or delete each of the Registration Memory settings. Refer to
pages 28–29 for details on the Rename or Delete operations.
Advanced Features
Refer to the Advanced Features section in this manual, Chapter 6.
Disabling recall of specific
items:
[FUNCTION] → [E] REGIST SEQUENCE/FREEZE/
VOICE SET → TAB [E][F] FREEZE
Calling up Registration
Memory numbers in order:
[FUNCTION] → [E] REGIST SEQUENCE/FREEZE/
VOICE SET → TAB [E][F] REGISTRATION SEQUENCE

Yamaha PSR-A2000 Specifications

General

Brand	Yamaha
Model	PSR-A2000
Category	Electronic Keyboard
Language	English