PSR-A2000 Owner’s Manual 159
Multi Pads – Adding Musical Phrases to Your Performance –
4
From the MULTI PAD EDIT display, you can rename, copy or delete a Multi Pad.
1 Press the MULTI PAD CONTROL [SELECT] button to call up the Multi Pad Bank
Selection display, then select a Bank to be edited.
2 Press the [8 ▼] (EDIT) button to call up the MULTI PAD EDIT display.
3 Select a particular Multi Pad to be edited by pressing any of the [A], [B], [F] and [G]
buttons.
4 Edit the selected Pad as desired.
For details on the naming and deleting procedures, refer to the Basic Operations section (pages 28–29).
Multi Pad Editing
[1 ▼]NAME Changes the name of each Multi Pad.
[3 ▼] COPY Copies the Multi Pad(s). See below.
[5 ▼] DELETE Deletes the selected Multi Pads.
Copying the Multi Pad
1 Press the [3 ▼] button in step 4 above.
2 Select the Multi Pads to be copied by using the [A], [B], [F] and [G] buttons, then press the [7 ▼]
(OK) button.
The selected Multi Pad(s) is copied to the clipboard.
3 Select the destination location by using the [A], [B], [F] and [G] buttons. If you want to copy the
selected Pad(s) to another bank, press the [8 ▲] (UP) button to call up the Multi Pad Bank Selec-
tion display, select the desired bank, press the [8 ▼] (EDIT) button, then select the destination.
4 Press the [4 ▼] (PASTE) button to execute the Copy operation.
To Next Page
Loading...
Need help?
General
