172 PSR-A2000 Owner’s Manual
Mixing Console – Editing the Volume and Tonal Balance –
8
4 Press the [I] (SAVE) button to call up the display for saving your original effect.
5 Use the [3 ▲▼]–[6 ▲▼] buttons to select the destination for saving the effect.
The maximum number for effects that can be saved differs depending on the effect block.
6 Press the [I] (SAVE) button to save the effect.
When recalling the saved effect, use the same procedure as in steps 4–5 of “Selecting an Effect Type.”
5
6