Yamaha RTX810 - Page 68

Gaining remote access using L2TP/IPsec
(Continued from the previous page)
3
Tap on “VPN settings”.
4
Tap on “Add VPN”.
5
Tap on “Add L2TP/IPsec PSK VPN”.
6
Enter necessary setup information.
VPN name
Type “Yamaha-vpn” as the L2TP client name.
Set VPN server
Enter the host address obtained with the netvolante DNS
service or the WAN IP address of the product.
Set IPsec pre-shared key
Enter the shared key that is congured on the product.
68
Implementing site-to-site VPN connections
4