YASKAWA GPD-506V

DIGITAL OPERATOR
DESCRIPTION KEY SEQUENCE DISPLAY
➂ Forward Run Press RUN LED turns "ON
"
• Forward run (15 Hz)
(after motor reaches
set frequency)
➃ Reverse Run Press
• Select reverse run.
3 times
Switch to "
rev"
by pressing
either
• Write-in set value. Press
• Select output frequency Press
monitor display.
13 times
➄ Frequency Reference Value
Change (15 Hz to 60 Hz)
• Select frequency Press
reference value display
15 times
• Change set value. Change value
by pressing
either
Table 2-1. Test Run With Digital Operator - Continued
2-3
RUN
DSPL
ENTER
DSPL
DSPL
Frequency Ref
15.0 Hz
Frequency Ref
60.0 Hz
/|\
/|\
Output Freq
15.0 Hz
Forward/Reverse
F o r
Forward/Reverse
r E v
/|\
/|\
Forward/Reverse
r E v
Output Freq
15.0 Hz