The operation described in Table 2-1 and shown in Figure 2-2 is for a standard 60 Hz
motor.
DIGITAL OPERATOR
DESCRIPTION KEY SEQUENCE DISPLAY
➀ Power ON SEQ & REF LEDs "ON",
• Displays frequency
reference setting.
Drive LED "ON"
Operation Condition Setting Press SEQ & REF LEDs "
OFF"
• Select LOCAL mode.
Drive LED "
ON"
➁ Frequency Setting Change value
• Change reference value. by pressing either
• Write-in set value. Press
• Select output frequency Press
monitor display.
Table 2-1. Test Run With Digital Operator
2-2
+
OUTPUT
FREQUENCY
0
–
SELECT
REV OPER.
CHANGE FREQ.
SETPOINT
POWER
ON
FREQUENCY
SETTING
FORWARD
RUN
STOP
FWD
ROTATION
AT 15HZ
REV
ROTATION
AT 60HZ
REV
ROTATION
AT 15HZ
ACCEL
ACCEL
ACCEL
DECEL
DECEL
Figure 2-2. Example of Simple Operation
2.2 TEST RUN USING DIGITAL OPERATOR ("LOCAL" CONTROL)
➀
➁
➂
➃
➄
➅
To Next Page
Loading...
