SPEED CONTROL (continued)
Modbus Control 5.16 n002, n036 - n040,
n101- n106
PID Control 5.22 n002, n024 - n030, n043,
n044, n084 - n093,
n094, n095
REVERSE
Reverse Run Disabled Table A1-1 n006
RUNNING
Critical Frequency Rejection 5.6 n062, n063, n064
Carrier Frequency 5.5 n054
Speed Search 5.19E n036 - n040, n056 - n058
Speed Coincidence 5.20B n075, n076
Energy Saving 5 .9 n096 - n100
Slip Compensation 5.23.1 n107 - n109
RUNNING IMPROVEMENTS
Torque Compensation 5.27 n071
Stall Prevention 5.24 n072, n073, n074
PROTECTIVE FEATURES
Momentary Power Loss Ride-thru 5.17 n055, n059
Auto Restart 5 . 4 n060, n061
Frequency Reference Loss Detection 5.13 n046, n047
Frequency Reference Retention 5.14 n045
Overtorque/Undertorque Detection 5.21 n041, n042, n077, n078,
n079
Miscellaneous Protective Functions 5.16.1 n110
Timer Function 5.19 F n041, n042, n080, n081
DRIVE CONTROLS, INPUT
Multi-function Analog Input (Auto/Manual) 5.11 n043, n044
Frequency Reference Bias and Gain 5.10 n048 - n051
Multi-function Input Terminals 5.19 n036 - n040
External Fault Terminals 5.19 n036 - n040
DRIVE OUTPUT
Multi-function Output Terminals 5.20 n041, n042, n075, n076
Analog Monitor Output (Multi-function) 5.18 n052, n053
MONITOR DISPLAY
Digital Operator Display Selection 5.8 n023
Table 5-1. List of Features Defined By Parameters - Continued
FUNCTION
PARAGRAPH
PARAMETER(S)
REFERENCE
5-2
To Next Page
Loading...
