YASKAWA SGDV-OFB03A User Manual

12 Error Lists
12-2
12.1 Errors related to Feedback Option Module Identification
Alarm Number: Alarm
Name (Alarm
Description)
Cause Investigative Actions Corrective Actions
A.044:
Semi-closed/Fully-
closed Loop Control
Parameter Setting Error
The connected option module and the
setting value of Pn00B.3 and/or
Pn002.3 do not match.
Check the settings of
PN00B.3 and/or Pn002.3
The setting of option
module must be compati-
ble with the settings of
Pn00B.3 and/or Pn002.3.
A.051:
Unsupported Device
Alarm
1) An unsupported device was
connected.
2) The unsupported combination:
a) SERVOPACK (rotary motor)
with feedback option module for
linear motor
b) SERVOPACK (linear motor)
with feedback option module for
rotary motor
3) The fully closed loop functionality
is not enabled. Please configure
Pn002.3.
Check the product specifi-
cations
Configure Pn00B.3.
Select the correct combi-
nation of units
A.E72:
Feedback Option Mod-
ule Detection Failure
The connection between the
SERVOPACK and the feedback
option module is faulty.
Check the connection
between the SERVO-
PACK and the feedback
option module.
Correctly connect the
feedback option module.
The feedback option module was
disconnected.
-
Execute Fn014 (Resetting
configuration error of
option module) with the
digital operator or
SigmaWin+ and turn the
power supply OFF and
then ON again.
A feedback option module fault
occurred.
-
Replace the feedback
option module.
A SERVOPACK fault occurred. -
Replace the SERVO-
PACK.
A.E75:
Unsupported Feedback
Option Module
An unsupported feedback option
module was connected.
Refer to the catalog of the
connected feedback
option module or the man-
ual of the SERVOPACK
Connect a compatible
feedback option module.
An inapplicable Sigma-5 firmware
version was used.
-
Replace the SERVO-
PACK.

YASKAWA SGDV-OFB03A Specifications

General

Brand	YASKAWA
Model	SGDV-OFB03A
Category	Servo Drives
Language	English