YASKAWA SGDV - Page 381

11.2 List of Parameters
11-21
11
Appendix
Pn460
Notch Filter Adjustment Switch 0000 to 0101 − 0101 Immediately Tuning
6.2.1
6.3.1
6.5.1
Pn501 Zero Clamp Level 0 to 10000
1 min
-1
10 Immediately Setup 5.3.5
Pn502 Rotation Detection Level 1 to 10000
1 min
-1
20 Immediately Setup 5.10.3
Pn503
Speed Coincidence Signal Output
Width
0 to 100
1 min
-1
10 Immediately Setup 5.3.8
Pn506
Brake Reference
-
Servo OFF Delay
Time
0 to 50 10 ms 0 Immediately Setup
5.2.4
Pn507 Brake Reference Output Speed Level 0 to 10000
1 min
-1
100 Immediately Setup
Pn508
Waiting Time for Brake Signal When
Motor Running
10 to 100 10 ms 50 Immediately Setup
Pn509 Instantaneous Power Cut Hold time 20 to 1000 1 ms 20 Immediately Setup 5.2.6
Parameter
No.
Name
Setting
Range
Units
Factory
Setting
When
Enabled
Classification
Reference
Section
0
1
1st step notch filter is not adjusted automatically with utility function.
1st step notch filter is adjusted automatically with utility function.
Notch Filter Adjustment Selection 1
4th
digit
3rd
digit
2nd
digit
1st
digit
n.
Reserved (Do not change.)
0
1
2nd step notch filter is not adjusted automatically with utility function.
2nd step notch filter is adjusted automatically with utility function.
Notch Filter Adjustment Selection 2
Reserved (Do not change.)