This chapter describes the installation conditions and pre-
cautions for Servomotors.
8.1
Installation Conditions . . . . . . . . . . . . . . . . 8-2
8.1.1 Installation Precautions . . . . . . . . . . . . . . . . . . . . 8-2
8.1.2 Installation Environment . . . . . . . . . . . . . . . . . . . 8-3
8.1.3 Installation Orientation . . . . . . . . . . . . . . . . . . . . 8-3
8.2
Mounting to the Machine . . . . . . . . . . . . . . 8-4
8.3
Oil and Water Countermeasures . . . . . . . . . 8-7
8.4
Equipment Structure . . . . . . . . . . . . . . . . . . 8-8
8.4.1 Minimum Angle of Oscillation . . . . . . . . . . . . . . . 8-8
8.4.2 Precautions on Passing the Origin . . . . . . . . . . . 8-8
8.5
Servomotor Temperature Increase . . . . . . . 8-9
Servomotor
Installation
8
To Next Page
Loading...
