YASKAWA SGM7D - 1.4 Combinations of Servomotors and Servopacks

1.4 Combinations of Servomotors and SERVOPACKs
1-9
1
Basic Information on Servomotors
SGM7F (Small
Capacity, with
Core, Inner Rotor)
SGM7F-02A 2.00 6.00
2R8A, 2R8F 2R8A
SGM7F-05A 5.00 15.0
SGM7F-07A 7.00 21.0
SGM7F-04B 4.00 12.0
SGM7F-10B 10.0 30.0
SGM7F-14B 14.0 42.0 5R5A
SGM7F-08C 8.00 24.0 2R8A, 2R8F 2R8A
SGM7F-17C 17.0 51.0 5R5A
SGM7F-25C 25.0 75.0 7R6A
SGM7F-16D 16.0 48.0 5R5A
SGM7F-35D 35.0 105
7R6A
*2
, 120A 7R6A
*2
SGM7F (Medium
Capacity, Inner
Rotor with Core)
SGM7F-45M 45.0 135 7R6A
SGM7F-80M 80.0 240
120A
–
SGM7F-80N 80.0 240
SGM7F-1AM 110 330 180A
SGM7F-1EN 150 450
200A
SGM7F-2ZN 200 600
SGMCV (Small
Capacity, Inner
Rotor with Core)
SGMCV-04B 4.00 12.0
2R8A, 2R8F
2R8A
SGMCV-10B 10.0 30.0
SGMCV-14B 14.0 42.0 5R5A
SGMCV-08C 8.00 24.0 2R8A, 2R8F
2R8A
SGMCV-17C 17.0 51.0 5R5A
SGMCV-25C 25.0 75.0 7R6A
SGMCV-16D 16.0 48.0 5R5A
SGMCV-35D 35.0 105
7R6A
*2
, 120A 7R6A
*2
SGMCS (Small
Capacity, Coreless
Inner Rotor)
SGMCS-02B 2.00 6.00
2R8A, 2R1F
2R8A
SGMCS-05B 5.00 15.0
SGMCS-07B 7.00 21.0
SGMCS-04C 4.00 12.0
2R8A, 2R8F
SGMCS-10C 10.0 30.0
SGMCS-14C 14.0 42.0
SGMCS-08D 8.00 24.0
SGMCS-17D 17.0 51.0
SGMCS-25D 25.0 75.0
SGMCS-16E 16.0 48.0
5R5A
SGMCS-35E 35.0 105
SGMCS (Medium
Capacity, Inner
Rotor with Core)
SGMCS-45M 45.0 135 7R6A
SGMCS-80M 80.0 240
120A
–
SGMCS-80N 80.0 240
SGMCS-1AM 110 330 180A
SGMCS-1EN 150 450
200A
SGMCS-2ZN 200 600
*1.
An SGM7D Servomotor is used together with an FT-specification SERVOPACK. The following SERVOPACK models
can be used.
•
SGD7S-

A

F82

•
SGD7S-

00A

F83

*2.
Use derated values for this combination. Refer to the following section for information on derating values.
6.2.2 Ratings on page 6-5
Continued from previous page.
Direct Drive Servomotor Model
Rated
Tor que
Nm
Instanta-
neous
Maximum
Tor que
Nm
SERVOPACK Model
SGD7S- SGD7W-