YASKAWA SGMGV - Page 392

11 Appendix
11-32
Pn301
100 min
-1
Internal Set Speed 1 Immediately
Pn302
200 min
-1
Internal Set Speed 2 Immediately
Pn303
300 min
-1
Internal Set Speed 3 Immediately
Pn304
500 min
-1
JOG Speed Immediately
Pn305 0 ms Soft Start Acceleration Time Immediately
Pn306 0 ms Soft Start Deceleration Time Immediately
Pn307 0.40 ms
Speed Reference Filter Time Con-
stant
Immediately
Pn310 0000 Vibration Detection Switch Immediately
Pn311 100 % Vibration Detection Sensibility Immediately
Pn312
50 min
-1
Vibration Detection Level Immediately
Pn324 300%
Moment of Inertia Calculating Start
Level
Immediately
Pn400
3.0 V/Rated
torque
Torque Reference Input Gain Immediately
Pn401 1.00 ms
Torque Reference Filter Time Con-
stant
Immediately
Pn402 800 % Forward Torque Limit Immediately
Pn403 800 % Reverse Torque Limit Immediately
Pn404 100 % Forward External Torque Limit Immediately
Pn405 100 % Reverse External Torque Limit Immediately
Pn406 800 % Emergency Stop Torque Immediately
Pn407
10000 min
-1
Speed Limit during Torque Control Immediately
Pn408 0000 Torque Related Function Switch −
Pn409 5000 Hz 1st Notch Filter Frequency Immediately
Pn40A 0.70 1st Notch Filter Q Value Immediately
Pn40B 0.000 1st Notch Filter Depth Immediately
Pn40C 5000 Hz 2nd Notch Filter Frequency Immediately
Pn40D 0.70 2nd Notch Filter Q Value Immediately
Pn40E 0.000 2nd Notch Filter Depth Immediately
Pn40F 5000 Hz
2nd Torque Reference Filter Fre-
quency
Immediately
Pn410 0.50 2nd Torque Reference Filter Q Value Immediately
Pn412 1.00 ms
1st Step 2nd Torque Reference Filter
Time Constant
Immediately
Pn415 0.00 ms T-REF Filter Time Constant Immediately
Pn424 50%
Torque Limit at Main Circuit Voltage
Drop
Immediately
Pn425 100 ms
Release Time for Torque Limit at
Main Circuit Voltage Drop
Immediately
Pn456 15 % Sweep Torque Reference Amplitude Immediately
Pn460 0101 Notch Filter Adjustment Switch Immediately
Pn501
10 min
-1
Zero Clamp Level Immediately
Pn502
20 min
-1
Rotation Detection Level Immediately
Pn503
10 min
-1
Speed Coincidence Signal Output
Width
Immediately
Parame-
ter
Factory
Setting
Name
When
Enabled