iii
HW1484764
Notes for Safe Operation
Read this manual carefully before installation, operation, maintenance, or inspection of
the YRC1000/YRC1000micro.
In this manual, the Notes for Safe Operation are classified as “DANGER”, “WARNING”,
“CAUTION”, or “NOTICE”.
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury. Safety Signs
identified by the signal word DANGER should be used
sparingly and only for those situations presenting the most
serious hazards.
Indicates a potentially hazardous situation which, if not
avoided, will result in death or serious injury. Hazards
identified by the signal word WARNING present a lesser
degree of risk of injury or death than those identified by the
signal word DANGER.
Indicates a hazardous situation, which if not avoided, could
result in minor or moderate injury. It may also be used
without the safety alert symbol as an alternative to
“NOTICE”.
NOTICE is the preferred signal word to address practices
not related to personal injury. The safety alert symbol
should not be used with this signal word. As an alternative
to “NOTICE”, the word “CAUTION” without the safety alert
symbol may be used to indicate a message not related to
personal injury.
Even items described as “CAUTION” may result in a serious accident in some
situations. At any rate, be sure to follow these important items.
To ensure safe and efficient operation at all times, be sure to follow all
instructions, even if not designated as “DANGER”, “WARNING” and
“CAUTION”.
To Next Page
Loading...
