Basic Call Features
93
You can pick up an incoming call by using the DPickup/GPickup soft key. To use call pickup,
you need to configure the call pickup code beforehand on a global or per-line basis via web
user interface.
Note
Directed Call Pickup
To enable directed call pickup and configure the directed call pickup code on a global
basis via web user interface:
1. Click on Features->Call Pickup.
2. Select Enabled from the pull-down list of Directed Call Pickup.
3. Enter the directed call pickup code in the Directed Call Pickup Code field.
4. Click Confirm to accept the change.
To configure the directed call pickup code on a per-line basis via web user interface:
1. Click on Account->Advanced.
If there are many incoming calls at the same time, pressing the GPickup soft key on the phone
will pick up the call that rings first.
To Next Page
Loading...
Need help?
General