User Guide for the SIP-T19(P) E2 IP Phone
82
2. Select Enabled from the pull-down list of Allow Trans Exist Call.
3. Click Confirm to accept the change.
Blind Transfer
To perform a blind transfer during a call:
1. Press or the Tran soft key during a call.
2. You can do one of the following:
- Enter the number you want to transfer the call to.
Press or the Tran soft key to complete the transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
- Press the Dir soft key, and then select Local Directory. Select the desired group and
search for the contact (Directory should be configured in advance. Refer to Directory
on page 31 for more information).
Press , or the Send soft key to complete the transfer.
- Press the Dir soft key, and then select History. Select the desired list and then press
or to select the entry (Directory should be configured in advance. Refer to
To Next Page
Loading...
Need help?
General