User Guide for the SIP-T19(P) E2 IP Phone
96
The GPickup soft key appears on the LCD screen.
2. Press the GPickup soft key on your phone when a phone in the group receives an
incoming call.
The call is answered on your phone.
Note
Anonymous Call
You can use anonymous call to block your identify and phone number from appearing to the
called party when you call someone. For example, you want to call to consult some services, but
don’t want to be harassed. Anonymous call is configurable on a per-line basis. You can also
configure the phone to send anonymous call on/off code to the server to activate/deactivate
anonymous call on the server side.
Note
To configure anonymous call via phone user interface:
1. Press Menu->Features->Anonymous Call.
2. Press or , or the Switch soft key to select Enabled from the Local Anonymous
field.
3. (Optional.) Press or to select the desired value from the Send Anony Code field.
The phone will send the configured on code or off code depending on your selection when
you enable or disable anonymous call feature on the phone.
Anonymous call is not available on all servers. Contact your system administrator for the
anonymous call on code and off code.
The directed call pickup code and group call pickup code are predefined on the system server.
Contact your system administrator for more information.
The call pickup code configured on a per-line basis takes precedence over that configured on a
To Next Page
Loading...
Need help?
General