Basic Call Features
97
4. (Optional.) Enter the anonymous call on code in the On Code field.
5. (Optional.) Enter the anonymous call off code in the Off Code field.
6. Press the Save soft key to accept the change or the Back soft key to cancel.
Anonymous call is configurable via web user interface at the path Account->Basic.
To place an anonymous call:
1. Using the specific line on the phone to place a call to phone B.
The LCD screen of phone B prompts an incoming call from anonymity.
Anonymous Call Rejection
You can use anonymous call rejection to reject incoming calls from anonymous callers.
Anonymous call rejection automatically rejects incoming calls from callers who deliberately
block their identities and numbers from being displayed. Anonymous call rejection is
configurable on a per-line basis. You can also configure the phone to send anonymous call
rejection on/off code to the server to activate/deactivate anonymous call rejection on the server
side.
To configure anonymous call rejection via phone user interface:
1. Press Menu->Features->Anonymous Call.
2. Press or to scroll to the Anony Rejection field.
3. Press or , or the Switch soft key to select Enabled from the Anony Rejection
field.
4. (Optional.) Press or , or the Switch soft key to select the desired value from the
Send Reject Code field.
The phone will send the configured reject on code or reject off code depending on your
selection when you enable or disable anonymous call rejection feature on the phone.
5. (Optional.) Enter the anonymous call rejection on code in the On Code field.
To Next Page
Loading...
Need help?
General