Customizing Your Phone
43
4. Press the Add soft key to accept the change or the Back soft key to cancel.
To add a contact to the blacklist directory from the local directory:
1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory enabled in
the directory by default.
If Local Directory is removed from the directory (refer to Directory on page 31), press
Menu->Directory->Local Directory to enter the local directory.
2. Select the desired contact group and then press the Enter soft key.
If the contact is not in any group, select All Contacts and then press the Enter soft key.
3. Press or to highlight the desired contact.
4. Press the Option soft key and then select Add to Blacklist.
The LCD screen prompts the following warning:
5. Press the OK soft key to accept the change.
For operating instructions on editing, deleting, placing calls to and/or searching for contacts in
the blacklist directory, refer to the operating instructions of Editing Contacts on page 37,
Deleting Contacts on page 38, Placing Calls to Contacts on page 39 and/or Searching for
Contacts on page 39.
Remote Phone Book
You can add new contacts to the local directory, search for a contact, or simply dial a contact
number from the remote phone book.
You can configure your new phone to access up to 5 remote phone books. For the access URL of
the remote phone book, contact your system administrator.
For operating instructions on placing calls to and/or searching for contacts in the remote phone
book, refer to the operating instructions of Placing Calls to Contacts on page 39 and/or
Searching for Contacts on page 39.
To Next Page
Loading...
Need help?
General