User Guide for the SIP-T19(P) E2 IP Phone
44
Configuring an Access URL
To configure an access URL for a remote phone book via web user interface:
1. Click on Directory->Remote Phone Book.
2. Enter the access URL in the Remote URL field.
3. Enter the name in the Display Name field.
4. Click Confirm to accept the change.
Note
Accessing the Remote Phone Book
To access your remote phone book via phone user interface:
1. Press Menu->Directory->Remote Phone Book.
If Remote Phone Book is added to the directory (refer to Directory on page 31), press
Dir->Remote Phone Book to enter the remote phone book.
2. Press or to select the desired remote group, and then press the Enter soft key.
The phone then connects to the remote phone book and proceeds to load it. The contacts
in the remote phone book are displayed on the LCD screen.
3. Press the Back soft key to back to the previous screen.
Incoming/Outgoing Call Lookup
You can enable the phone to present the caller/callee identity stored in the remote phone book
when receiving/placing a call.
An access URL for a remote phone book is configurable via web user interface only.
To Next Page
Loading...
Need help?
General