Customizing Your Phone
63
You can specify the emergency telephone numbers on the IP phone for contacting the
emergency services in an emergency situation. You can dial these numbers when the phone is
locked. For more information on phone lock, refer to Phone Lock on page 25.
Note
To specify emergency numbers via web user interface:
1. Click on Features->Phone Lock.
2. Enter the emergency number in the Emergency field.
For multiple emergency numbers, enter a comma between every two emergency numbers.
The default emergency numbers are 112, 911 and 110.
3. Click Confirm to accept the change.
Note
Live Dialpad
You can enable live dialpad feature on the SIP-T19(P) E2 IP phone, which enables the IP phone
to automatically dial out a phone number without pressing the send key. You can also configure
a delay, and then the phone will dial out the phone number automatically after the designated
period of time.
To enable live dialpad via web user interface:
1. Click on Settings->Preference.
2. Select Enabled from the pull-down list of Live Dialpad.
3. Enter the desired delay time in the Inter Digit Time(1~14s) field.
Contact your local phone service provider for available emergency numbers in your area.
The IP phone also supports the emergency dialplan. For more information, contact your
system administrator.
Emergency number is configurable via web user interface only.
To Next Page
Loading...
Need help?
General