Advanced Phone Features
101
Intercom
Intercom is a useful feature in an office environment to quickly connect with the operator or the
secretary. You can press the intercom key to automatically connect with a preconfigured target
extension for outgoing intercom calls, and the target extension will automatically answer
incoming intercom calls by default.
Note
Configuring the Intercom Feature on the IP Phone
Configuring an Intercom Key
To configure an intercom key via web user interface:
1. Click on Dsskey->Programable Key.
2. Select the desired programable key.
3. Select Intercom from the pull-down list of Type.
4. Enter the target extension number in the Value field.
5. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
Label is configurable only when customizing SoftKey (1-4).
6. Click Confirm to accept the change.
Incoming Intercom Calls
The SIP-T19(P) E2 IP phone supports automatically to answer an incoming intercom call by
default. The phone automatically plays a warning tone when it receives an incoming intercom
call. In addition, you can enable the phone to mute the microphone when it automatically
answers an incoming intercom call. You can also enable the phone to automatically answer an
incoming intercom call while there is already an active call on the phone. The active call is then
Intercom is not available on all servers. Contact your system administrator for more information.
To Next Page
Loading...
Need help?
General