Basic Call Features
91
To retrieve a parked call in FAC mode:
1. Do one of the following:
- If the park retrieve code is not configured, dial the park retrieve code (e.g., *88).
- If the park retrieve code is configured, press the Retrieve soft key on the dialing
screen.
The phone will dial the configured park retrieve code and the Retrieve screen appears
as below:
2. Follow the voice prompt, do one of the following:
- Press on the phone where the call is parked.
- Enter the desired extension followed by # (e.g., 4603#) on any phone.
Transfer Mode
To configure call park feature in transfer mode via web user interface:
1. Click on Features->Call Pickup.
2. Select Transfer from the pull-down list of Call Park Mode.
3. Select Enabled from the pull-down list of Call Park.
If Enabled is selected, the Park soft key will display on the LCD screen during a call, and
the Retrieve soft key will display on the dialing screen.
4. (Optional.) Enter the call park code in the Call Park Code field.
5. (Optional.) Enter the park retrieve code in the Park Retrieve Code field.
To Next Page
Loading...
Need help?
General