User Guide for the SIP-T19(P) E2 IP Phone
84
information).
Press , or the Send soft key to complete the transfer.
3. Press or the Tran soft key to complete call transfer.
Then the call is connected to the number to which you are transferring.
Semi-attended Transfer
To perform a semi-attended transfer:
1. Press or the Tran soft key during a call.
2. Do one of the following:
- Enter the number you want to transfer the call to.
Press or to dial out.
- Press the Dir soft key, and then select Local Directory. Select the desired group and
search for the contact (Directory should be configured in advance. Refer to Directory
on page 31 for more information).
Press , or the Send soft key to dial out.
- Press the Dir soft key, and then select History. Select the desired list and then press
or to select the entry (Directory should be configured in advance. Refer to
Directory on page 31 for more information).
Press , or the Send soft key to dial out.
- Press the Dir soft key, and then select Remote Phone Book. Select the desired group
and search for the contact (Directory should be configured in advance. Refer to
Directory on page 31 and Remote Phone Book on page 43 for more information).
Press , or the Send soft key to dial out.
- If there are multiple calls, you can select the NewCall and repeat steps mentioned
above to complete transfer.
3. Press or the Tran soft key to complete the transfer when receiving ringback.
If you are using a handset, the transfer can be completed by hanging up the handset.
Attended Transfer
To perform an attended transfer:
1. Press or the Tran soft key during a call.
2. Do one of the following:
- Enter the number you want to transfer the call to.
Press or to dial out.
To Next Page
Loading...
Need help?
General