User Guide for the SIP-T19(P) E2 IP Phone
60
2. Enter the desired value (e.g., 1xx) in the Rule field.
3. Click Add to add the dial now rule.
When you enter the number “123” using the keypad, the phone will dial out “123”
automatically without pressing any key.
Note
Time Out for Dial Now Rule
You can configure the delay time for dial now rules. That is, you can configure your phone to
automatically dial out the phone number which matches a dial now rule, after the designated
delay time.
To configure the time out for dial now rule via web user interface:
1. Click on Features->General Information.
2. Enter the time between 0 and 14 (seconds) in the Time Out for Dial Now Rule field.
You can also edit or delete the dial now rule, refer to Replace Rule on page 58 for more
information.
Dial now rule is configurable via web user interface only.
To Next Page
Loading...
