Yealink VC110 - Page 194

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
178
Parameter
Description
Configuration
Method
start time, end time and
offset.
Default: Automatic
Fixed Type
Configures the DST calculation
methods.
 By Date- specifies the
month, day and hour to be
the DST start /end date.
 By Week- specifies the
month, week, day and hour
the DST start /end date.
Note: It only works if the value
of Daylight Saving Time is set to
Enabled.
Web User Interface
Start Date
When the DST calculation
method is set to By Date.
Configures the time to start DST.
Note: It only works if the value
of the Daylight Saving Time is set
to Enabled.
Web User Interface
End Date
When the DST calculation
method is set to By Date.
Configures the time to end DST.
Note: It only works if the value
of the Daylight Saving Time is set
to Enabled.
Web User Interface
DST Start Month
When the DST calculation
method is set to By Week.
Configures the time to start DST.
Note: It only works if the value
of the Daylight Saving Time is set
to Enabled.
Web User Interface
DST Start Day of Week
DST Start Day of Week Last
in Month
Start Hour of Day
DST Stop Month
When the DST calculation
method is set to By Week,
Configures the time to end DST.
Note: It only works if the value
of the Daylight Saving Time is set
Web User Interface
DST Stop Day of Week
DST Stop Day of Week Last
in Month