Yealink VC110 - Page 252

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
236
using the endpoint. Therefore they do not have to maintain the local directory. Users can search
and dial out from the LDAP directory and save LDAP entries to the local directory. LDAP entries
displayed on the display device screen are read only. They cannot be added to, edited or
deleted by users. When an LDAP server is configured properly, the endpoint can look up entries
from the LDAP server in a wide variety of ways. The LDAP server indexes all the data in its entries,
and "filters" may be used to select the desired entry or group, and retrieve the desired
information.
Configurations on the endpoint limit the amount of displayed entries when querying from the
LDAP server, and decide how the attributes are displayed and sorted.
Performing a LDAP search on the endpoint:
 Enter search content in the dialing screen. (Ensure that the LADP is in the enabled search
source lists)
 In the Directory screen, select Company to enter the LDAP search screen, and then enter a
few characters which you want to search.
The endpoint will send the search request to the LDAP server, the LDAP server then performs a
search based on the entered content and configured filter condition, and returns results to the
endpoint.
LDAP Attributes
The following table lists the most common attributes used to configure the LDAP lookup on the
endpoint:
Abbreviation
Name
Description
gn
givenName
First name
cn
commonName
LDAP attribute is made up from given
name joined to surname.
sn
surname
Last name or family name
dn
distinguishedName
Unique identifier for each entry
dc
dc
Domain component
-
company
Company or organization name
-
telephoneNumber
Office phone number
mobile
mobilephoneNumber
Mobile or cellular phone number
ipPhone
IPphoneNumber
Home phone number
LADP parameters are described below:
Parameter
Description
Configuration Method
LDAP Enable
Enables or disables the LDAP feature
on the endpoint.
Web User Interface