Yealink VC110 - Page 253

Endpoint Management
237
Parameter
Description
Configuration Method
Default: Disabled
LDAP Name Filter
Configures the name attribute for
LDAP searching.
Example:
(|(cn=%)(sn=%))
Web User Interface
LDAP Number
Filter
Configures the number attribute for
LDAP searching.
Example:
(|(telephoneNumber=%)(mobile=%)
)
Web User Interface
LDAP TLS Mode
Configures the connection mode
between the LDAP server and video
conferencing endpoint.
 LDAP—Unencrypted
connection between LDAP
server and the endpoint (port
389 is used by default).
 LDAP TLS Start—TLS/SSL
connection between LDAP
server and the endpoint (port
389 is used by default).
 LDAPs—TLS/SSL connection
between LDAP server and the
endpoint (port 636 is used by
default).
Default: LDAP
Web User Interface
LDAP Server
Address
Configures the domain name or IP
address of the LDAP server.
Web User Interface
Port
Configures the LDAP server port.
Default: 389
Web User Interface
LDAP User Name
Configures the user name used to
log into the LDAP server.
Note: The user name is provided by
the server administrator. If the LDAP
server allows ‘anonymous’ to login,
you don’t need to provide the user
name to access the LDAP server.
Web User Interface