Yealink VC110 - Page 66

Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
56
Parameter
Description
Configuration Method
Default: Blank
Note: If you change this
parameter, the endpoint will
reboot to make the change take
effect.
Gateway
Configures the gateway
assigned to the endpoint.
Default: Blank
Note: If you change this
parameter, the endpoint will
reboot to make the change take
effect.
Remote Control
Web User Interface
Primary DNS
Configures the primary DNS
server assigned to the endpoint.
Default: Blank
Note: If you change this
parameter, the endpoint will
reboot to make the change take
effect.
Remote Control
Web User Interface
Secondary DNS
Configures the secondary DNS
server assigned to the endpoint.
Default: Blank
Note: If you change this
parameter, the endpoint will
reboot to make the change take
effect.
Remote Control
Web User Interface
To configure network settings manually via the web user interface:
1. Click on Network->LAN Configuration.
2. In the IP Config block, mark the Static IP radio box.